If you're arranging an asbestos survey for your home or rental property, you might be wondering what exactly the surveyor will be looking for. Knowing what the survey entails will help you stay informed and take the right action afterwards.
This guide outlines what Melbourne asbestos surveyors investigate across Derbyshire, the methods used, and the follow-up process.
Purpose of an Asbestos Survey
The main goal of an asbestos survey is to detect and evaluate asbestos-containing materials (ACMs) in a property. These materials were widely used in UK construction until asbestos was banned in 1999. Properties built before 2000 are likely to still harbour some form of ACMs.
During the survey, professionals will:
Identify the presence and extent of ACMs.
Evaluate how well the materials are holding up.
Evaluate the potential risk of disturbance or exposure.
This information helps determine whether management, encapsulation, or removal is necessary.
Key Elements Surveyors Examine
Surveyors usually examine these aspects:
Typical ACMs Found in Homes
The surveyor inspects areas where asbestos was typically used, including:
Textured wall and ceiling finishes like Artex
Ceiling and wall panels (such as asbestos insulating board or AIB)
Lagging and insulation around pipes
Vinyl floor tiles and the adhesive underneath
Cement products (like guttering, soffits, or flue pipes)
Roofing sheets or garage roofs made from asbestos cement
Internal partitions or heat shields containing ACMs
Condition of Materials
Each material's condition is documented. Fragile or deteriorated materials, particularly friable types, carry increased danger. As an example, intact roofing sheets are lower risk than crumbling pipe insulation.
Potential for Disruption
The surveyor assesses how likely each ACM is to be disturbed during normal occupancy or planned work. Panels in high-traffic areas are at greater risk than those hidden in attics.
Will the Survey Include Sample Collection?
Typically, yes. When ACMs are suspected, a few samples are safely removed for analysis. The lab determines:
Whether asbestos is in the material.
The type of asbestos (e.g. chrysotile, amosite, crocidolite).
How much asbestos is present.
Sampling is carried out with care to avoid contamination.
Understanding the Survey Categories
The depth of the survey depends on its purpose:
Standard Management Survey
Designed to locate ACMs that could be disturbed during normal occupancy or routine maintenance.
Non-intrusive and minimal disruption.
Suitable for landlords managing communal areas in rented housing or cautious homeowners wanting peace of mind.
Refurbishment/Demolition Survey
Legally required ahead of major structural work.
In-depth inspection that includes destructive sampling.
Targets concealed materials that would be affected by renovation.
What Happens After the Survey?
After the inspection, a comprehensive report is issued. It contains:
A list of all ACMs found.
Photographs and locations.
Evaluations of condition and associated risk.
Advice on what to do next, from removal to monitoring.
Dangerous ACMs will need to be dealt with by a licensed team. Lower risk materials might just need sealing or occasional checks.
Key Takeaway
These surveys give you a roadmap for safe management, not just detection. Renovating or letting an older home? A survey should be on your checklist.
Speak to a certified professional for guidance with bookings or interpreting results. Let us help you carry out asbestos management the right way.
We've got more information on asbestos and ACMs for Melbourne residents on the site here:
- What Melbourne Contractors Check For In An Asbestos Report
- Where to Locate Reputable Asbestos Disposal Points in Melbourne
- Where To Look For ACMs In Melbourne Homes
We also cover more of the local Derbyshire area too: