If you're arranging an asbestos survey for your home or rental property, you might be wondering what exactly the surveyor will be looking for. Knowing what the survey entails will help you stay informed and take the right action afterwards.
In this article, we'll explain what your Long Line asbestos survey looks for, how it's carried out, and what happens afterward.
Why Asbestos Surveys Are Conducted
At its core, an asbestos survey is designed to locate, identify, and assess asbestos-containing materials (ACMs) within a building. These materials were widely used in UK construction until asbestos was banned in 1999. Properties built before 2000 are likely to still harbour some form of ACMs.
The surveyor's role is to:
Identify the presence and extent of ACMs.
Assess their condition.
Consider how likely the materials are to be disturbed.
This information helps determine whether management, encapsulation, or removal is necessary.
What Areas and Materials Are Inspected
A typical asbestos survey includes checks for the following:
Typical ACMs Found in Homes
The surveyor inspects areas where asbestos was typically used, including:
Textured wall and ceiling finishes like Artex
Asbestos insulating boards in walls and ceilings
Pipe insulation and lagging
Floor tiles and the bitumen adhesive below them
Cement products (like guttering, soffits, or flue pipes)
Roofing sheets or garage roofs made from asbestos cement
Internal partitions or heat shields containing ACMs
State of the ACMs
Surveyors make note of the state of each ACM. Materials in poor condition-especially those that are friable (easily crumbled or damaged)-pose a higher risk. For example, flaking pipe lagging is more dangerous than intact asbestos cement panels.
Risk of Being Disturbed
The surveyor assesses how likely each ACM is to be disturbed during normal occupancy or planned work. For instance, ceiling tiles in a loft might remain untouched for years, whereas bathroom panels could be disturbed during renovation.
Is Sampling Part of the Survey?
In most cases, yes. When ACMs are suspected, a few samples are safely removed for analysis. This helps confirm:
The presence of asbestos fibres.
The type of asbestos (e.g. chrysotile, amosite, crocidolite).
How much asbestos is present.
All sampling is done in a controlled, safe manner to prevent fibre release.
Different Survey Types Explained
The scope of inspection is guided by its intended use:
Management Survey
Identifies materials that might be affected during standard use of the property.
Carried out with limited invasion to the property.
Best for those who need regular safety checks or general awareness.
Refurbishment/Demolition Survey
Necessary for planned refurbishments or tear-downs.
Extensive as it often requires accessing hidden areas.
Aims to uncover any hidden ACMs that might be disturbed during building work.
What Happens After the Survey?
After the inspection, a comprehensive report is issued. It contains:
A register of all identified ACMs.
Images and positions of each ACM.
Evaluations of condition and associated risk.
Advice on what to do next, from removal to monitoring.
If high-risk asbestos is found, you may need to arrange removal by a licensed contractor. Encapsulation or periodic reviews may be enough for stable ACMs.
Final Thoughts
These surveys give you a roadmap for safe management, not just detection. Renovating or letting an older home? A survey should be on your checklist.
Need help arranging a survey or making sense of your report? A licensed expert can assist. Trust us to support you through the process with safety and clarity.
We've got more information on asbestos and ACMs for Long Line residents on the site here:
- What Does An Asbestos Survey In Long Line Consider?
- Finding Legal Asbestos Disposal Businesses in Long Line
- Where To Look For ACMs In Long Line Houses
We also cover more of the local Derbyshire area too: