Wondering what to expect during an asbestos inspection? Here's what you need to know. Understanding how it works ensures you're ready for what comes next.
In this article, we'll explain what your Breadsall asbestos survey looks for, how it's carried out, and what happens afterward.
Why Asbestos Surveys Are Conducted
The main goal of an asbestos survey is to detect and evaluate asbestos-containing materials (ACMs) in a property. These materials were widely used in UK construction until asbestos was banned in 1999. ACMs may remain in homes constructed prior to the year 2000.
During the survey, professionals will:
Identify the presence and extent of ACMs.
Evaluate how well the materials are holding up.
Judge the risk level associated with each ACM.
The findings help homeowners, landlords, and contractors make informed decisions about safe management or removal.
Key Elements Surveyors Examine
Surveyors usually examine these aspects:
Frequent ACMs Inspected in Domestic Properties
The surveyor inspects areas where asbestos was typically used, including:
Textured wall and ceiling finishes like Artex
Ceiling and wall panels (such as asbestos insulating board or AIB)
Lagging and insulation around pipes
Floor tiles and the bitumen adhesive below them
Cement products (like guttering, soffits, or flue pipes)
Roofing sheets or garage roofs made from asbestos cement
Partition walls or fireproof panels behind boilers or heaters
Condition of Materials
Surveyors make note of the state of each ACM. Fragile or deteriorated materials, particularly friable types, carry increased danger. For example, flaking pipe lagging is more dangerous than intact asbestos cement panels.
Potential for Disruption
They evaluate the chance of disturbance during everyday use or renovations. For instance, ceiling tiles in a loft might remain untouched for years, whereas bathroom panels could be disturbed during renovation.
Are Samples Taken?
Typically, yes. If materials are suspected of containing asbestos, the surveyor will usually take small samples for laboratory testing. The lab determines:
The presence of asbestos fibres.
The type of asbestos (e.g. chrysotile, amosite, crocidolite).
How much asbestos is present.
All sampling is done in a controlled, safe manner to prevent fibre release.
Types of Survey and What They Cover
The depth of the survey depends on its purpose:
Management Survey
Designed to locate ACMs that could be disturbed during normal occupancy or routine maintenance.
Non-intrusive and minimal disruption.
Suitable for landlords managing communal areas in rented housing or cautious homeowners wanting peace of mind.
Pre-Construction ACM Inspection
Necessary for planned refurbishments or tear-downs.
Highly intrusive, as it may involve opening up walls, ceilings, and floor voids.
Aims to uncover any hidden ACMs that might be disturbed during building work.
Next Steps Following the Survey
Once completed, you'll receive a detailed asbestos survey report. This includes:
A register of all identified ACMs.
Images and positions of each ACM.
Evaluations of condition and associated risk.
Recommendations for management, monitoring, or safe removal.
If high-risk asbestos is found, you may need to arrange removal by a licensed contractor. Lower risk materials might just need sealing or occasional checks.
Conclusion
These surveys give you a roadmap for safe management, not just detection. Renovating or letting an older home? A survey should be on your checklist.
Need help arranging a survey or making sense of your report? A licensed expert can assist. Let us help you carry out asbestos management the right way.
We've got more information on asbestos and ACMs for Breadsall residents on the site here:
- What Breadsall Surveyors Check For During An Building Report
- Finding Reputable Asbestos Disposal Points in Breadsall
- Typical Locations Of ACMs In Breadsall Residential Buildings
We also cover more of the local Derbyshire area too: