Wondering what to expect during an asbestos inspection? Here's what you need to know. Knowing what the survey entails will help you stay informed and take the right action afterwards.
We'll break down the key things a survey in Wirksworth looks for, how it's done, and what to expect after.
What Is the Aim of an Asbestos Survey?
Asbestos surveys aim to find, identify, and assess the condition of ACMs in domestic buildings. These materials were widely used in UK construction until asbestos was banned in 1999. Properties built before 2000 are likely to still harbour some form of ACMs.
During the survey, professionals will:
Pinpoint the location and amount of asbestos-containing materials.
Check the current state of each material.
Consider how likely the materials are to be disturbed.
The findings help homeowners, landlords, and contractors make informed decisions about safe management or removal.
What Does the Surveyor Look For?
Here are the main elements a qualified surveyor will investigate:
Typical ACMs Found in Homes
The surveyor inspects areas where asbestos was typically used, including:
Textured wall and ceiling finishes like Artex
Asbestos insulating boards in walls and ceilings
Pipe insulation and lagging
Floor tiles and the bitumen adhesive below them
Cement products (like guttering, soffits, or flue pipes)
Asbestos cement roof panels or garage coverings
Partition walls or fireproof panels behind boilers or heaters
State of the ACMs
Surveyors make note of the state of each ACM. Materials in poor condition-especially those that are friable (easily crumbled or damaged)-pose a higher risk. As an example, intact roofing sheets are lower risk than crumbling pipe insulation.
Likelihood of Disturbance
They evaluate the chance of disturbance during everyday use or renovations. Panels in high-traffic areas are at greater risk than those hidden in attics.
Are Samples Taken?
Yes. If materials are suspected of containing asbestos, the surveyor will usually take small samples for laboratory testing. This helps confirm:
The presence of asbestos fibres.
The type of asbestos (e.g. chrysotile, amosite, crocidolite).
The concentration of fibres in the sample.
All sampling is done in a controlled, safe manner to prevent fibre release.
Different Survey Types Explained
The scope of inspection is guided by its intended use:
Survey for Day-to-Day Use
Focuses on ACMs that pose risks during everyday operations.
Usually requires little disturbance to the building fabric.
Suitable for landlords managing communal areas in rented housing or cautious homeowners wanting peace of mind.
Survey Prior to Renovation or Demolition
Necessary for planned refurbishments or tear-downs.
In-depth inspection that includes destructive sampling.
Targets concealed materials that would be affected by renovation.
What Happens After the Survey?
After the inspection, a comprehensive report is issued. It contains:
A list of all ACMs found.
Photographs and locations.
Risk assessments and material condition ratings.
Recommendations for management, monitoring, or safe removal.
Where serious risks exist, professional removal will be necessary. For lower-risk materials, encapsulation (sealing) or routine monitoring may suffice.
Conclusion
Surveys are about more than just finding asbestos in Wirksworth-they provide essential risk assessments and action plans. Whether you're renovating a 1950s home or managing a rental flat, an asbestos survey is a practical and often essential step in keeping people safe.
Speak to a certified professional for guidance with bookings or interpreting results. Let us help you carry out asbestos management the right way.
We've got more information on asbestos and ACMs for Wirksworth residents on the site here:
- Understanding What Wirksworth Asbestos Surveys Examine
- Locating Approved Sites for Asbestos Waste Disposal in Wirksworth
- Where To Look For Asbestos-Containing Materials In Wirksworth Houses
We also cover more of the local Derbyshire area too: