If you're arranging an asbestos survey for your home or rental property, you might be wondering what exactly the surveyor will be looking for. Understanding how it works ensures you're ready for what comes next.
In this article, we'll explain what your Monyash asbestos survey looks for, how it's carried out, and what happens afterward.
What Is the Aim of an Asbestos Survey?
The main goal of an asbestos survey is to detect and evaluate asbestos-containing materials (ACMs) in a property. Such materials were common in UK buildings until the 1999 asbestos ban. Properties built before 2000 are likely to still harbour some form of ACMs.
During the survey, professionals will:
Identify the presence and extent of ACMs.
Check the current state of each material.
Judge the risk level associated with each ACM.
The findings help homeowners, landlords, and contractors make informed decisions about safe management or removal.
What Does the Surveyor Look For?
Here are the main elements a qualified surveyor will investigate:
Common Asbestos-Containing Materials
The surveyor inspects areas where asbestos was typically used, including:
Textured coatings (e.g. Artex ceilings and walls)
Asbestos insulating boards in walls and ceilings
Lagging and insulation around pipes
Floor tiles and the bitumen adhesive below them
Asbestos cement items like soffits or flues
Roofing sheets or garage roofs made from asbestos cement
Internal partitions or heat shields containing ACMs
State of the ACMs
Surveyors make note of the state of each ACM. Friable materials, which easily break down, are more hazardous. Damaged lagging presents greater concern than sealed cement boards.
Risk of Being Disturbed
Surveyors determine how easily each material could be disturbed. Bathroom panelling may be affected by upgrades, while loft tiles may stay undisturbed.
Is Sampling Part of the Survey?
In most cases, yes. When ACMs are suspected, a few samples are safely removed for analysis. The lab determines:
Whether asbestos is in the material.
What kind of asbestos it is (white, brown, or blue).
How much asbestos is present.
Sampling is carried out with care to avoid contamination.
Understanding the Survey Categories
Surveys vary based on the reason they are being conducted:
Standard Management Survey
Identifies materials that might be affected during standard use of the property.
Usually requires little disturbance to the building fabric.
Ideal for routine inspections and landlord obligations.
Pre-Construction ACM Inspection
Required before any significant renovation or demolition work.
Highly intrusive, as it may involve opening up walls, ceilings, and floor voids.
Aims to uncover any hidden ACMs that might be disturbed during building work.
What Happens After the Survey?
You'll get full documentation after the survey. Your report will show:
A list of all ACMs found.
Photographs and locations.
Risk assessments and material condition ratings.
Recommendations for management, monitoring, or safe removal.
Dangerous ACMs will need to be dealt with by a licensed team. Lower risk materials might just need sealing or occasional checks.
Key Takeaway
These surveys give you a roadmap for safe management, not just detection. Renovating or letting an older home? A survey should be on your checklist.
Need help arranging a survey or making sense of your report? A licensed expert can assist. Trust us to support you through the process with safety and clarity.
We've got more information on asbestos and ACMs for Monyash residents on the site here:
- An Overview Of What Monyash Asbestos Surveys Inspect
- Identifying Approved Sites for Asbestos Waste Disposal in Monyash
- Common Places To Find ACMs In Monyash Households
We also cover more of the local Derbyshire area too: