If you're arranging an asbestos survey for your home or rental property, you might be wondering what exactly the surveyor will be looking for. Understanding the purpose and scope of the survey can help you feel more prepared-and ensure you know what steps to take once the results come in.
This guide outlines what Darley Dale asbestos surveyors investigate across Derbyshire, the methods used, and the follow-up process.
Why Asbestos Surveys Are Conducted
Asbestos surveys aim to find, identify, and assess the condition of ACMs in domestic buildings. Asbestos featured in many homes before it was prohibited in 1999. Many homes built before 2000 may still contain asbestos in various forms.
During the survey, professionals will:
Identify the presence and extent of ACMs.
Check the current state of each material.
Judge the risk level associated with each ACM.
This information helps determine whether management, encapsulation, or removal is necessary.
What Does the Surveyor Look For?
Surveyors usually examine these aspects:
Frequent ACMs Inspected in Domestic Properties
They will check areas that historically contained ACMs, such as:
Textured coatings (e.g. Artex ceilings and walls)
Ceiling and wall panels (such as asbestos insulating board or AIB)
Lagging and insulation around pipes
Floor tiles and the bitumen adhesive below them
Asbestos cement items like soffits or flues
Asbestos cement roof panels or garage coverings
Partition walls or fireproof panels behind boilers or heaters
State of the ACMs
Surveyors make note of the state of each ACM. Materials in poor condition-especially those that are friable (easily crumbled or damaged)-pose a higher risk. As an example, intact roofing sheets are lower risk than crumbling pipe insulation.
Potential for Disruption
The surveyor assesses how likely each ACM is to be disturbed during normal occupancy or planned work. Panels in high-traffic areas are at greater risk than those hidden in attics.
Will the Survey Include Sample Collection?
In most cases, yes. When ACMs are suspected, a few samples are safely removed for analysis. The lab determines:
Whether asbestos is in the material.
The type of asbestos (e.g. chrysotile, amosite, crocidolite).
How much asbestos is present.
Sampling is carried out with care to avoid contamination.
Types of Survey and What They Cover
The depth of the survey depends on its purpose:
Management Survey
Focuses on ACMs that pose risks during everyday operations.
Usually requires little disturbance to the building fabric.
Best for those who need regular safety checks or general awareness.
Pre-Construction ACM Inspection
Necessary for planned refurbishments or tear-downs.
Extensive as it often requires accessing hidden areas.
Ensures that no asbestos is accidentally disturbed during works.
Next Steps Following the Survey
After the inspection, a comprehensive report is issued. Your report will show:
A register of all identified ACMs.
Images and positions of each ACM.
Evaluations of condition and associated risk.
Advice on what to do next, from removal to monitoring.
Dangerous ACMs will need to be dealt with by a licensed team. For lower-risk materials, encapsulation (sealing) or routine monitoring may suffice.
Conclusion
These surveys give you a roadmap for safe management, not just detection. Renovating or letting an older home? A survey should be on your checklist.
Speak to a certified professional for guidance with bookings or interpreting results. Trust us to support you through the process with safety and clarity.
We've got more information on asbestos and ACMs for Darley Dale residents on the site here:
- A Look At What Darley Dale Asbestos Surveys Inspect
- Locating Approved Sites for Asbestos Waste Disposal in Darley Dale
- Typical Locations Of ACMs In Darley Dale Domestic Buildings
We also cover more of the local Derbyshire area too: