If you're arranging an asbestos survey for your home or rental property, you might be wondering what exactly the surveyor will be looking for. Understanding how it works ensures you're ready for what comes next.
This guide outlines what Cutthorpe asbestos surveyors investigate across Derbyshire, the methods used, and the follow-up process.
Purpose of an Asbestos Survey
The main goal of an asbestos survey is to detect and evaluate asbestos-containing materials (ACMs) in a property. These materials were widely used in UK construction until asbestos was banned in 1999. ACMs may remain in homes constructed prior to the year 2000.
A qualified surveyor will typically:
Pinpoint the location and amount of asbestos-containing materials.
Check the current state of each material.
Judge the risk level associated with each ACM.
This information helps determine whether management, encapsulation, or removal is necessary.
What Areas and Materials Are Inspected
A typical asbestos survey includes checks for the following:
Typical ACMs Found in Homes
Common locations where asbestos may be found include:
Textured coatings (e.g. Artex ceilings and walls)
Ceiling and wall panels (such as asbestos insulating board or AIB)
Lagging and insulation around pipes
Floor tiles and the bitumen adhesive below them
Cement products (like guttering, soffits, or flue pipes)
Roofing sheets or garage roofs made from asbestos cement
Partition walls or fireproof panels behind boilers or heaters
Material Integrity Assessment
Surveyors make note of the state of each ACM. Materials in poor condition-especially those that are friable (easily crumbled or damaged)-pose a higher risk. As an example, intact roofing sheets are lower risk than crumbling pipe insulation.
Risk of Being Disturbed
They evaluate the chance of disturbance during everyday use or renovations. Bathroom panelling may be affected by upgrades, while loft tiles may stay undisturbed.
Will the Survey Include Sample Collection?
In most cases, yes. When ACMs are suspected, a few samples are safely removed for analysis. This helps confirm:
The presence of asbestos fibres.
The type of asbestos (e.g. chrysotile, amosite, crocidolite).
How much asbestos is present.
Sampling is carried out with care to avoid contamination.
Different Survey Types Explained
The scope of inspection is guided by its intended use:
Survey for Day-to-Day Use
Identifies materials that might be affected during standard use of the property.
Usually requires little disturbance to the building fabric.
Ideal for routine inspections and landlord obligations.
Refurbishment/Demolition Survey
Required before any significant renovation or demolition work.
Extensive as it often requires accessing hidden areas.
Targets concealed materials that would be affected by renovation.
Next Steps Following the Survey
After the inspection, a comprehensive report is issued. Your report will show:
A list of all ACMs found.
Photographs and locations.
Risk assessments and material condition ratings.
Recommendations for management, monitoring, or safe removal.
If high-risk asbestos is found, you may need to arrange removal by a licensed contractor. Lower risk materials might just need sealing or occasional checks.
Final Thoughts
An asbestos survey doesn't just look for the presence of asbestos-it evaluates the risk it poses and helps you plan how to deal with it responsibly. Whether you're renovating a 1950s home or managing a rental flat, an asbestos survey is a practical and often essential step in keeping people safe.
Speak to a certified professional for guidance with bookings or interpreting results. Let us help you carry out asbestos management the right way.
We've got more information on asbestos and ACMs for Cutthorpe residents on the site here:
- A Look At What Cutthorpe Asbestos Surveys Examine
- Searching For Certified Sites for Asbestos Waste Disposal in Cutthorpe
- Common Places To Find ACMs In Cutthorpe Homes
We also cover more of the local Derbyshire area too: