Booking an asbestos survey for a domestic or rental property often raises the question: what will the surveyor check? Knowing what the survey entails will help you stay informed and take the right action afterwards.
In this article, we'll explain what your Stanton asbestos survey looks for, how it's carried out, and what happens afterward.
Purpose of an Asbestos Survey
Asbestos surveys aim to find, identify, and assess the condition of ACMs in domestic buildings. These materials were widely used in UK construction until asbestos was banned in 1999. ACMs may remain in homes constructed prior to the year 2000.
During the survey, professionals will:
Find and map out where ACMs exist.
Assess their condition.
Consider how likely the materials are to be disturbed.
The findings help homeowners, landlords, and contractors make informed decisions about safe management or removal.
Key Elements Surveyors Examine
Surveyors usually examine these aspects:
Common Asbestos-Containing Materials
Common locations where asbestos may be found include:
Textured coatings (e.g. Artex ceilings and walls)
Ceiling and wall panels (such as asbestos insulating board or AIB)
Lagging and insulation around pipes
Floor tiles and the bitumen adhesive below them
Cement products (like guttering, soffits, or flue pipes)
Roofing sheets or garage roofs made from asbestos cement
Internal partitions or heat shields containing ACMs
State of the ACMs
Surveyors make note of the state of each ACM. Friable materials, which easily break down, are more hazardous. Damaged lagging presents greater concern than sealed cement boards.
Risk of Being Disturbed
Surveyors determine how easily each material could be disturbed. Bathroom panelling may be affected by upgrades, while loft tiles may stay undisturbed.
Is Sampling Part of the Survey?
Typically, yes. Surveyors often take controlled samples to confirm if asbestos is present. The lab determines:
Whether asbestos is in the material.
The type of asbestos (e.g. chrysotile, amosite, crocidolite).
The concentration of fibres in the sample.
All sampling is done in a controlled, safe manner to prevent fibre release.
Different Survey Types Explained
The scope of inspection is guided by its intended use:
Management Survey
Focuses on ACMs that pose risks during everyday operations.
Carried out with limited invasion to the property.
Best for those who need regular safety checks or general awareness.
Pre-Construction ACM Inspection
Necessary for planned refurbishments or tear-downs.
Highly intrusive, as it may involve opening up walls, ceilings, and floor voids.
Targets concealed materials that would be affected by renovation.
What Happens After the Survey?
Once completed, you'll receive a detailed asbestos survey report. It contains:
A list of all ACMs found.
Photographs and locations.
Evaluations of condition and associated risk.
Recommendations for management, monitoring, or safe removal.
Dangerous ACMs will need to be dealt with by a licensed team. Lower risk materials might just need sealing or occasional checks.
Conclusion
An asbestos survey doesn't just look for the presence of asbestos-it evaluates the risk it poses and helps you plan how to deal with it responsibly. Whether you're renovating a 1950s home or managing a rental flat, an asbestos survey is a practical and often essential step in keeping people safe.
Speak to a certified professional for guidance with bookings or interpreting results. We're here to help you navigate the process safely and confidently.
We've got more information on asbestos and ACMs for Stanton residents on the site here:
- Understanding What Stanton Asbestos Surveys Consider
- Locating Certified Sites for Asbestos Waste in Stanton
- Common Places To Find ACMs In Stanton Households
We also cover more of the local Derbyshire area too: