If you're arranging an asbestos survey for your home or rental property, you might be wondering what exactly the surveyor will be looking for. Knowing what the survey entails will help you stay informed and take the right action afterwards.
This guide outlines what Northwood asbestos surveyors investigate across Derbyshire, the methods used, and the follow-up process.
Purpose of an Asbestos Survey
At its core, an asbestos survey is designed to locate, identify, and assess asbestos-containing materials (ACMs) within a building. Asbestos featured in many homes before it was prohibited in 1999. Properties built before 2000 are likely to still harbour some form of ACMs.
A qualified surveyor will typically:
Identify the presence and extent of ACMs.
Check the current state of each material.
Evaluate the potential risk of disturbance or exposure.
This information helps determine whether management, encapsulation, or removal is necessary.
What Areas and Materials Are Inspected
A typical asbestos survey includes checks for the following:
Common Asbestos-Containing Materials
The surveyor inspects areas where asbestos was typically used, including:
Textured coatings (e.g. Artex ceilings and walls)
Ceiling and wall panels (such as asbestos insulating board or AIB)
Lagging and insulation around pipes
Floor tiles and the bitumen adhesive below them
Asbestos cement items like soffits or flues
Asbestos cement roof panels or garage coverings
Internal partitions or heat shields containing ACMs
State of the ACMs
Each material's condition is documented. Fragile or deteriorated materials, particularly friable types, carry increased danger. Damaged lagging presents greater concern than sealed cement boards.
Risk of Being Disturbed
Surveyors determine how easily each material could be disturbed. Panels in high-traffic areas are at greater risk than those hidden in attics.
Are Samples Taken?
In most cases, yes. Surveyors often take controlled samples to confirm if asbestos is present. This helps confirm:
The presence of asbestos fibres.
What kind of asbestos it is (white, brown, or blue).
How much asbestos is present.
Sampling is carried out with care to avoid contamination.
Types of Survey and What They Cover
The scope of inspection is guided by its intended use:
Standard Management Survey
Designed to locate ACMs that could be disturbed during normal occupancy or routine maintenance.
Usually requires little disturbance to the building fabric.
Suitable for landlords managing communal areas in rented housing or cautious homeowners wanting peace of mind.
Survey Prior to Renovation or Demolition
Necessary for planned refurbishments or tear-downs.
Highly intrusive, as it may involve opening up walls, ceilings, and floor voids.
Aims to uncover any hidden ACMs that might be disturbed during building work.
Post-Survey Procedures and Reports
After the inspection, a comprehensive report is issued. Your report will show:
A list of all ACMs found.
Photographs and locations.
Evaluations of condition and associated risk.
Recommendations for management, monitoring, or safe removal.
If high-risk asbestos is found, you may need to arrange removal by a licensed contractor. For lower-risk materials, encapsulation (sealing) or routine monitoring may suffice.
Key Takeaway
These surveys give you a roadmap for safe management, not just detection. Whether you're renovating a 1950s home or managing a rental flat, an asbestos survey is a practical and often essential step in keeping people safe.
Speak to a certified professional for guidance with bookings or interpreting results. Trust us to support you through the process with safety and clarity.
We've got more information on asbestos and ACMs for Northwood residents on the site here:
- What Does An Asbestos Survey In Northwood Examine?
- Locating Certified Sites for Asbestos Waste Disposal in Northwood
- Where To Look For ACMs In Northwood Houses
We also cover more of the local Derbyshire area too: