Booking an asbestos survey for a domestic or rental property often raises the question: what will the surveyor check? Knowing what the survey entails will help you stay informed and take the right action afterwards.
This guide outlines what Langley Common asbestos surveyors investigate across Derbyshire, the methods used, and the follow-up process.
What Is the Aim of an Asbestos Survey?
Asbestos surveys aim to find, identify, and assess the condition of ACMs in domestic buildings. Such materials were common in UK buildings until the 1999 asbestos ban. Properties built before 2000 are likely to still harbour some form of ACMs.
During the survey, professionals will:
Identify the presence and extent of ACMs.
Check the current state of each material.
Evaluate the potential risk of disturbance or exposure.
These insights guide appropriate actions, from monitoring to full removal.
Key Elements Surveyors Examine
A typical asbestos survey includes checks for the following:
Typical ACMs Found in Homes
The surveyor inspects areas where asbestos was typically used, including:
Textured coatings (e.g. Artex ceilings and walls)
Ceiling and wall panels (such as asbestos insulating board or AIB)
Pipe insulation and lagging
Floor tiles and the bitumen adhesive below them
Cement products (like guttering, soffits, or flue pipes)
Roofing sheets or garage roofs made from asbestos cement
Internal partitions or heat shields containing ACMs
State of the ACMs
Each material's condition is documented. Materials in poor condition-especially those that are friable (easily crumbled or damaged)-pose a higher risk. Damaged lagging presents greater concern than sealed cement boards.
Potential for Disruption
Surveyors determine how easily each material could be disturbed. Panels in high-traffic areas are at greater risk than those hidden in attics.
Is Sampling Part of the Survey?
Yes. If materials are suspected of containing asbestos, the surveyor will usually take small samples for laboratory testing. This helps confirm:
Whether asbestos is in the material.
The type of asbestos (e.g. chrysotile, amosite, crocidolite).
The concentration of fibres in the sample.
Sampling is carried out with care to avoid contamination.
Understanding the Survey Categories
The scope of inspection is guided by its intended use:
Standard Management Survey
Identifies materials that might be affected during standard use of the property.
Carried out with limited invasion to the property.
Best for those who need regular safety checks or general awareness.
Refurbishment/Demolition Survey
Required before any significant renovation or demolition work.
Extensive as it often requires accessing hidden areas.
Aims to uncover any hidden ACMs that might be disturbed during building work.
Post-Survey Procedures and Reports
After the inspection, a comprehensive report is issued. This includes:
A list of all ACMs found.
Images and positions of each ACM.
Evaluations of condition and associated risk.
Advice on what to do next, from removal to monitoring.
Dangerous ACMs will need to be dealt with by a licensed team. For lower-risk materials, encapsulation (sealing) or routine monitoring may suffice.
Conclusion
An asbestos survey doesn't just look for the presence of asbestos-it evaluates the risk it poses and helps you plan how to deal with it responsibly. From home upgrades to rental responsibilities, surveys play a key role in safeguarding health.
If you'd like advice on booking a survey or understanding your results, get in touch with a qualified asbestos professional. We're here to help you navigate the process safely and confidently.
We've got more information on asbestos and ACMs for Langley Common residents on the site here:
- What Langley Common Inspectors Check For With Their Building Survey
- Where to Locate Legal Asbestos Disposal Points in Langley Common
- Where To Look For Asbestos-Containing Materials In Langley Common Homes
We also cover more of the local Derbyshire area too: